Manufacturer : Honda
Productions : 1981
Engine : Twin cylinder Air-cooled Four-stroke, Single Over Head Cam Parallel twin.
Transmission : -
Honda introduced several 200 cm³ bikes with similar engines but different body variations in the 1980s. The model introduced in South Africa and Pakistan was known as the CD 200 “Road Master”. It was a detuned version of the Honda CD185 twin. The CD 200 sold more for its looks then performance as its square speedometer, huge front and rear mudguards, twin chrome exhausts, neatly tucked in choke behind handle bars and a chrome plated fuel tank with the Honda logo contributed to an interesting styling.
The bike was a cheap commuter vehicle with a claimed 100 miles (160 km) per gallon and a smooth ride. Too slow for a 200 cm³ bike, its top speed was only 70 mph (112 km/h) as the engine was detuned to keep maintenance cost to a minimum. This bike targeted users who wanted a comfortable cheap transport suitable for long routes with low maintenance. Use of simple drum breaks in rear and front and a single carburetor were other measures used to keep the maintenance low. The bike accelerated hard up to 65 mph (105 km/h); after that it was a flat ride. The engine had to be revved very hard to create any kind of excitement as the bike was too heavy (140 kg) for an engine that produced a modest 16 bhp.
This model suffered from various manufacturing faults like a noisy cam chain and an unreliable electrical starter (later models were upgraded with 12 volts CDI system in the UK.). In the UK the CD200 was affected by legislation restricting learner riders to bikes limited to 125 cm³ and 12bhp. Honda introduced a 125 cm³ Benly after the CD200 was withdrawn.The CD 200 Road Master was sold in South Africa until late 2004 and was used mainly as a courier/delivery bike.It retained the 6 volt electrics and points ignition.
April 15, 2011 – 11:43 pm
1966 Honda RC166 250 Specification :
Manufacturer : Honda
Productions : 1966
Engine : 250 cc
However technically interesting and highly developed the Honda RC116 and RC149 may be, the most appealing, the most glamorous racing bike ever built is no doubt the 1966 Honda RC166 six. Although the Italians are known for their creations, Carcano’s masterpiece, the Moto Guzzi V8 500 cc, was a lumpish, ungainly hunk of a motorcycle when compared to the sleek, beautiful lines of the Honda. It’s the comparison between a dray horse and a thoroughbred. In addition to its specifications and beauty came the incomparable, ear-splitting howl of its six megaphones and its invincibility in the hands of Mike Hailwood, which made it a legend in its time.
Although outwardly very like the RC165, internally the engine has been changed and now has a bore and stroke of 41 x 31 mm. See second image at left. Carburetors have cylindrical slides, although sometimes flat slides are used. Power output is 60 bhp at 18,000 rpm. Like the RC149, the bike has oil coolers in the right and left hand side of the fairing. Also new are the brakes, which have now radial cooling fins instead of circumferential ones. Dry weight of the seven speed bike is 112 kg.
September 19, 2010 – 1:41 am
 |
| Vespa 150 TAP 1956-1959 |
Vespa 150 TAP Specifications :
Manufacturer : Piaggio (France)
Productions : 1950′s
Photo Credit : Rama and symboles-et-traditions.com
The Vespa 150 TAP is an Italian Vespa scooter modified to transport a M20 75 mm recoilless rifle, which was used in the 1950s by the French Airborne Forces (Troupes aéroportées, or TAP). It was produced by Ateliers de Construction de Motocycles et Automobiles (ACMA), a licensed assembler of Vespas in France, in 1956 and 1959.
Its mounted M20, a U.S.-made light anti-armour cannon, was very light when compared to a standard 75mm cannon but was still able to penetrate 100 mm of armour by so-called HEAT warhead. The recoil is counteracted by venting propellant gases out the rear of the weapon which eliminated the need for a mechanical recoil system or heavy mounts, enabling the weapon to be fired from the Vespa frame.
 |
| Vespa 150 TAP 1956-1959 |
 |
| Vespa 150 TAP 1956-1959 |
The scooters would be parachute-dropped in pairs, accompanied by a two-man team. The gun was carried on one scooter, while the ammunition was loaded on the other. Due to the lack of any kind of aiming devices the recoilless rifle was never designed to be fired from the scooter, the gun was mounted on a tripod which was also carried by the scooter, before being fired.
The “Bazooka Vespa” was relatively cheap: Vespas cost roughly $500 at the time, and the M20s were plentiful. Roughly 800 of these scooters were deployed in the Algerian War.
 |
| Vespa 150 TAP 1956-1959 |
Source : wikipedia.org
January 26, 2011 – 3:51 pm
January 3, 2011 – 8:17 am
January 3, 2011 – 12:19 pm
April 25, 2011 – 12:10 pm
Fiat Tempra 1990-1998 Specification and Picture :
Manufacturer : Fiat
Productions : 1990-1998
Engine : 1.4 L I4, 1.6 L I4, 1.8 L I4, 1.9 L diesel I4, 1.9 L turbodiesel I4, 2.0 L I4, 2.0 L I4 DOHC Turbo
Transmission : 5-speed manual, 4-speed automatic, CVT.
The Tempra’s engine range was similar to that of the Tipo. Initially 1.4 and 1.6-litre models had carburettor engines. Both of these models were discontinued in 1992 due to the new European emission standards and thus all models from 1992 on had catalytic converters and electronic injection. Transmission was a standard 5 speed manual, but for the first time a mid size sedan was offered as with a continuously variable transmission which was previously available on Fiat Uno, Panda, Ritmo and Tipo. 2.0-litre-models were also available with an optional 4-speed automatic transmission.
During its 6 year production run, few changes were made apart from a minor facelift in 1993 resulting in a new front grille and other minor styling changes.
Chassis and main parts (most notably, the doors) were shared with the Fiat Tipo. Other vehicles, derived from the same project were Lancia Dedra (Tempra’s most similar cousin, sharing all mechanical components), Lancia Delta second generation, Alfa Romeo 155, Alfa 145 and Alfa 146.
Manufacturer : Honda
Productions : 1967
Engine : 36–45 hp (27–34 kW) and the N600 was capable of 81 mph (130 km/h)
Source : netcarshow.com
The N600 was introduced in 1969. It was technologically advanced for its time, with an all alloy engine which could achieve 9000 rpm. Engine output was 36–45 hp (27–34 kW) and the N600 was capable of 81 mph (130 km/h). It delivered surprisingly peppy performance because of its light weight (around 550 kg/1100 pounds), due to compact dimensions and some plastic parts (like the boot lid). The first brakes were very weak. Rear suspension was a torsion bar and leaf springs. Production was stopped in 1972, after the sportier Honda Z600 (or Z-Act, depending on country) was introduced.
read more »
August 21, 2010 – 11:14 pm
|
| Fongers M66 1966 |
Specification:
Manufacturer : Fongers
Production : 1966
Type : Folding Bike
Source : oudefiets.nl
January 23, 2011 – 10:39 am
|
| Fongers M2000 1968 |
Specification:
Manufacturer : Fongers
Production : 1968
Type : Folding Bike
Source : oudefiets.nl
